I hope that i understand you correctly.
The problem is, that your disc is not recognized as a PSX game.
You can fix it in combination with FMCB.
An info: The problem that the Y-Fix is not working, is a problem by the firmware of the modchip.
The original Matrix Infinity firmware can not running on a Clonechip.
They had to port it and some chips have bugs.
Like you can see, that the PS1 logo, is not displaying and the Y-Fix is not working on import-games.
The original Matrix Infinity have not this problem, also some older clones not have this problems too.
You have to install FMCB and GSM 0.38.
After that you have to press "O" by turning your PS2 on.
This will force, that CD's are recognized as a PS1 game.
Then launch GSM 0.38 and choose the mode that will working for you.
For me the SDTV 480i and 576i modes are working.
Exit to Browser and boot your PS1 game normally.
Another fix is to replace the modchip with an original Infinity, or an clone that have no issues.
I would recommend to search for a used original one.
Because it's hard to find a working Modbo or another one.
It has nothing todo, if it has written version 1.93, 1.99 or 2.00...
It's only a number, the last official firmware was version 1.93.
__________________
For perfect dumps:Use Alcohol 52/120% or CloneCD.
Use CCD/IMG/SUB or MDS/MDF format and check subchannel reading is enabled and is supported by your CD Drive(RAW DAO96).
For best burning results:Use Alcohol 120% or CloneCD.
Make sure your burner supports raw writing(RAW DAO96) and the imagefile contains subchannel data.
It's required for Libcrypt protected games and you don't need to patch the image and you get a 1:1 copy.
Burn at 4x speed, use Verbatim AZO or Taiyo Yuden CD-R's with 650MB.
|